Idiomas disponibles
Idiomas disponibles
SETTING THESLEEP TIMER
_
Q
.....
J
The unit can be turned off automatically
at a specified
time.
Use the remote control.
1 Press the SLEEP button.
CONNECTING O PTIONAL
EQUIPMENT
2 Within 4 seconds, press the ,=114 or I_11_ button
to specify the time until the power is turned off.
Each time the button
is pressed,
the time changes
between
10 and 240 minutes
in 10-minute
steps,
Specified
time
To check the time remaining until the power is turned off
Press the SLEEP button once. The remaining time is displayed
for 4 seconds.
To cancel
the sleep
timer
Press the SLEEP
button
twice so that "SLEEP"
on the display
disappears.
Refer to the operating
instructions
of the connected
equipment
for details.
• The connecting
cords are not supplied.
Obtain
the necessary
connecting
cords.
• Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AUX
JACKS
This unit can input analog sound signals through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players,
VCRs, TV, etc.).
Connect
the red plug to the R jack,
and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL
OUT (OPTICAL)
JACK
This unit can output CD digital
sound signals through
this jack.
Use an optical
cable to connect
digital
audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.).
Remove the dust cap (_ from the CD DIGITAL OUT (OPTICAL)
jack, Then,
connect
an optical
cable plug to the CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL)
jack is not being
used
Attach the supplied dust cap.
SUPER
WOOFER
<1JACK
Connect
an optional
powered sub woofer with a built-in-amplifier
to the jack.
EN_US. 2 2
