Porsche Home Energy Manager Manual Del Usuario página 19

Connecting to the device
In order to access the Web Application of the energy
manager, a connection must first be established be-
tween the end device (PC, tablet or smartphone) and
the energy manager. For an overview of all connec-
tion options, g Refer to chapter "5. Select network
connections" on page 20.
e
Select the appropriate connection type depend-
ing on signal strength and availability.
Forward to the Web Application
Information
Depending on the browser you are using, the Web
Application is not opened immediately, but rather a
message indicating the browser's security settings is
displayed first.
1. Select Advanced in the warning message dis-
played in the browser.
2. In the following dialog window, select Add ex-
ception.
�� The SSL certificate is confirmed and the
Web Application is opened.
WiFi
Two options are available for a WiFi connection:
– Hotspot:
The energy manager offers a wireless access
point (hotspot), which is password-protected
and requires a manual login. A WiFi-enabled end
device can connect to the hotspot and access
the Web Application of the energy manager.
–
WiFi network via WPS function:
The energy manager can connect to an exist-
ing home network (e. g. network router) can be
paired via the WPS function without entering a
password.
Web Application Opening via hotspot
b Energy manager is turned on. The energy man-
ager automatically opens its WiFi hotspot.
1. If the WiFi status does not flash blue or light up,
press the WiFi button of the energy manager.
2. Open the network symbol or WiFi symbol in the
info bar on the end device.
3. Select WiFi network from the list. The name of
the WiFi network corresponds to the SSID in the
letter containing access data and is displayed as
HEM-#######.
4. Select the Connect button.
5. Enter security code. The security code is marked
as WiFi PSK in the letter containing access data.
�� Establishing a connection to the WiFi net-
work.
Note: For the Windows 10 operating sys-
tem, the PIN input of the router is requested
first. Select the link Establish connection
with PLC security key and then enter the
key.
6. Open the browser.
7. Enter the IP address of the energy manager in
the browser address bar: 192.168.9.11
– or –
Enter the DNS address of the energy manager in
the browser address bar: https://porsche.hem
g Observe the operating instructions for the Porsche
Home Energy Manager.
Connecting to the device
open Web Application via WiFi (WPS func-
tion)
1. Press the WPS button on the network router.
2. Press the WPSbutton on the energy manager
within 2 minutes.
3. Select the relevant network in the router settings
and determine the IP address of the energy man-
ager.
4. Enter the IP address of the energy manager in
the browser address bar.
g Observe the operating instructions for the Porsche
Home Energy Manager.
Information
Some routers provide the ability to reach the Web
Application using the host name Porsche-HEM(e.g.
via https://porsche-hem/).
Ethernet
1. Connect the Ethernet cable to the energy man-
ager (port ETH0).
2. Select the relevant network in the router settings
and determine the IP address of the energy man-
ager.
3. Enter the IP address of the energy manager in
the browser address bar.
PLC client
The energy manager can be integrated into a PLC
network as a client.
Note: A PLC modem with HomePlug standard is re-
quired for this purpose (not included in the scope of
supply).
17