Idiomas disponibles
Idiomas disponibles
Definitions:
Safety
Guidelines
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
ADANGER:
Indicates
an
imminently
hazardous
situation which, ff not avoided, will result in death or
serious
injury.
i_,WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
A CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: indicates a practice not related to personal
injury
which, if not avoided, may result in property
damage.
IFYOU HAVE ANY QUESTIONS OR COMMENTS ABOUTTHIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
General
Power
Tool
Safety
Warnings
A
WARNING! Read all safety warnings
and all instructions
Failure to follow the warnings and instructions
may result in
electric shock, fire and/or serious injury,
SAVE
A££
WARNINGS
AND
INSTRUCTIONS
FOR
FUTURE
REFERENCE
The term "power tool"in the warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and weft lit. Cluttered or dark areas
invite accidents.
b) Do not operate
power
tools in explosive
atmospheres,
such as in the presence
of flammable
liquids,
gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children
and bystanders
away while operating
a
power tool Distractions can cause you to lose control.
2) ELECTRICAL
SAFETY
a) Power tool plugs
must match
the outlet.
Never modify
the plug in any way. Do not use any adapter plugs
with
earthed
(grounded)
power
tools.
Unmodified
plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact
with earthed
or grounded
surfaces
such as pipes, radiators,
ranges and refrigerators.
There
is an increased risk of electric shock if your body is earthed
or grounded.
c) Do not expose
power
tools
to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging
the power
tool
Keep cord
away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
