Idiomas disponibles
Idiomas disponibles
1. Remove allcomponents fromthecarton.
2. Attachthe MotorBracketon the outsideof the rightgrill bowl panel. Align the two holesof the
Bracket w iththe holeson the grill bowl.Tightensecurely usingtwo Screws #10-24x3/4" U NC,Plain
WashersandNutsprovided.
i[1111111111111111
Rotisserie Screw #10-24x3/4"
#10-24 Nut
Qty. 2
Part # S112G10124
",,
,\
Rotisserie Washer
Qty. 2
Part # S411G03084
Rotisserie Nut #10-24
Qty. 2
Part # S362G10124
J
Outside of Right Grill Bowl Panel
/
f
f
f
Motor Bracket
/
\\
'
X
/
J
Rotisserie Screw #10-24X3"UNC
with washers and nuts
,
Slide the Spit through the piece of meat or poultry and the Holding Forks onto each end of the Rotisserie
Spit. Adjust spacing between Holding Forks to accommodate
your food, then tighten the Thumbscrews
to keep the Holding
Forks in position. Slide the Collar onto the threaded
end of the Spit. Do not
tighten the Collar Thumbscrew
until the Rotisserie
is placed into your grill.
Holding Forks
J
Spit
Thumbscrew
1/4"x1/2"
Thumbscrew
1/4"x1/2"
Rotisserie
Thumbscrew
1/4"xl/2"
Qty. 3
Part # S196G04084
"Collar
19
