Kenmore ELITE 141.16655900 Guía Para El Uso Y Cuidado página 14

Idiomas disponibles

Idiomas disponibles

LP Gas Model only:
Connect Regulator with Hose to your LPG Tank
[]
Turn
all
Burner
Valves
to
the
OFF
position.
[]
Inspect the valve connection port and regulator assem-
bly for damage or debris. Remove any debris. Never
use damaged or plugged equipment.
[]
Connect the regulator assembly to the tank valve and
HAND TIGHTEN nut clockwise to a full stop. DO NOT
use a wrench
to tighten because
it could damage
the Quick
Coupling
Nut and result in a hazardous
condition.
[]
Open the tank valve 1/4 to 1/2 (counterclockwise)
and
use a soapy water solution to check all connections
for leaks before attempting
to light your grill. See
"Checking
for LP Gas Leaks".
If a leak is found,
turn the tank valve off and do not use your grill until
the leak is repaired.
j/f
- .....
Type 1 connection per
_
_ANSl
Z21.58-2007/CSA
1.6-2007
Quick
.................. Coupling Nut
\
CAUTION:
When the appliance is not in use the gas must
be turned off at the tank. Place dust cap on cylinder valve
outlet whenever the cylinder is not in use. Only install the
type of dust cap on the cylinder valve outlet that is provided
with the cylinder valve. Other types of caps or plugs may
result
in leakage
of propane.
Check all connections
for LP Gas Leaks
Never test for leaks with a flame. Prior to first use, at the
beginning of each season, or every time your LP Gas tank
is changed, you must check for gas leaks. Follow these three
steps:
[]
Make
a soap
solution
by mixing
one
part liquid
detergent
and one part water.
[]
Turn the grill Control Knobs to the full OFF position,
then turn the gas ON at source.
[]
Apply
the
soap
solution
to all gas
connections
indicated
by the arrows.
See diagram.
If bubbles
appear in the soap solution the connections
are not
properly sealed. Check
each fitting and tighten
or
repair
as
necessary.
Gas Valve/Manifold
/Assembly
Regulator
/
with Hose
(LPG)
LP Gas Tank
Disconnecting
A Liquid Propane Gas (LPG)
Tank From Your Grill
[]
Make sure the Burner Valves and LP Gas tank
valve are off. (Turn clockwise
to close.)
[]
Detach the hose and regulator assembly from the
LP Gas tank valve by turning the Quick Coupling
Nut
counterclockwise.
1. Do not store spare LP cylinderwithin
10
feet (3m) of this appliance.
2. Do not store or use gasoline
or other
flammable
liquids and vapors within 25
feet (8m) of this appliance.
3. When cooking
with oil/grease,
do not
allow
the
oil/grease
to
get
hotter
350°F (177°C).
4. Do not leave
oil/grease
unattended.
14
loading