Operating Range; Change The Microphone Sensitivity; Eco Mode; Reset The Baby Monitor - Philips AVENT SCD505 Manual Del Usuario

Operating range

• In normal mode:
• Outdoors: up to
1000 feet/330 meters
• Indoors: up to 150 feet/50 meters
• In ECO mode:
• Outdoors: up to 850 feet/260 meters
• The operating range varies depending on
the surroundings and other factors that
cause interference. For interference from
wet and moist materials, the range loss
is up to 100%. For interference from dry
materials, see the following table:
Dry materials Material
thickness
Wood, plaster, < 12 in/30 cm 0-10%
cardboard, glass
(without metal,
wires, or lead)
Brick, plywood < 12 in/30 cm 5-35%
Reinforced < 12 in/30 cm 30-100%
concrete
Metal grilles or < 0.4 in/1 cm
bars
Metal or < 0.4 in/1 cm
aluminium sheets
Change the microphone
sensitivity
You can change the microphone sensitivity of
the baby unit. There are five levels.
1
Press sensitivity repeatedly on the parent
unit.
»
The sound level lights illuminate briefly
and indicate the current sensitivity
settings on the baby unit.
12 EN

ECO mode

When you monitor your baby from a small
distance, you can enable ECO mode. In ECO
mode, the baby monitor consumes less energy,
but still ensures that you can hear your baby
clearly without any distracting noise. For the
operating range in ECO mode, see Section
"Operating range".
Note
•
Make sure that the parent unit is linked to the
baby unit.
1
To enable ECO mode, press and hold
Loss of
on the parent unit for two seconds.
range
»
90-100%
100%
2
To disable ECO mode, press and hold
for two seconds.
»

Reset the baby monitor

To reset the parent unit:
1
Press and hold
2
Press and hold
3
When you hold
»
To reset the baby unit:
1
Follow the same procedure as you reset
the parent unit.
The ECO mode indicator lights up
blue and the parent unit reboots.
The ECO mode indicator goes out
and the parent unit reboots.
to turn off the parent unit.
on the parent unit.
, turn on the parent unit.
The parent unit is reset.