Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The connection light burns red briefly and then starts blinking green as the parent unit tries
,
to establish connection with the baby unit.
The connection lights on the parent unit and the baby unit blink green until connection has
,
been established.
It takes about 30 seconds before a connection is established.
When a connection has been established between the parent unit and the baby unit, the
,
connection lights on both units burn green continuously. (Fig. 1)
If no connection has been established after 0 seconds, both connection lights burn red and
,
the parent unit beeps from time to time.
Place the baby unit at least 1 metre/ feet away from your baby. (Fig. 15)
5
Position the parent unit within the operating range of the baby unit. Make sure it is at least 1
metre/ feet away from the baby unit. For more information on the operating range, see
section 'Operating range' below. (Fig. 11)
operating range
The operating range of the baby monitor is 300 metres/900 feet in open air. Depending on the
surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is
up to 50 metres/150 feet.
Dry materials
Wood, plaster, cardboard, glass
(without metal, wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
Metal or aluminium sheets
For wet and moist materials, the range loss may be up to 100%.
Features
Extra parent unit
This appliance comes with two parent units instead of one, so that your baby can be monitored by
two persons at the same time.
adjusting loudspeaker volume
1
Briefly press the volume + and – buttons on the baby unit until the desired loudspeaker
volume for the baby unit has been reached. (Fig. 16)
Briefly press the volume + and – buttons on the parent unit until the desired loudspeaker
volume for the parent unit has been reached. (Fig. 1)
Note:If you press the volume + and – buttons too long, the volume will not be adjusted.
Note:If the volume is set to a high level, the units consume more power.
talk function
You can use the talk button on the parent unit to talk to your baby (e.g to comfort your baby).
1
Press and hold the talk button and talk clearly into the microphone. (Fig. 18)
Material thickness
< 30cm/12in
< 30cm/12in
< 30cm/12in
< 1cm/0.4in
< 1cm/0.4in
EngliSh
Loss of range
0-10%
5-35%
30-100%
90-100%
100%
11
Tabla de contenido
