EN
1
DESCRIPTION
1.1
PURPOSE
This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. It also can be used to trim and cut
around the edge of driveways, side walks and more.
1.2
OVERVIEW
Figure 1 - 20.
Rear handle
1
Trigger
2
Lock-out button
3
Speed button
4
Rear handle rotate button
5
Upper shaft
6
Auxiliary handle
7
Coupler
8
Lower shaft
9
Cut-off blade
10
Flower guard
11
Trimmer head
12
Support wheel
13
Guard
14
Slot
15
Release button
16
Positioning hole
17
Hex wrench
18
Bolt
19
Lower clamp
20
Knob
21
Battery release button
22
Trimmer head rotate button
23
Tab
24
Spool cover
25
Spool
26
Spool housing
27
Anchor hole
28
Line slot
29
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
English
2
GENERAL POWER TOOL SAFETY
WARNINGS
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
3
SAFETY
Make sure that you follow all safety instructions.
Refer to Safety Manual.
4
INSTALLATION
4.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1.
Open the package.
2.
Read the documentation provided in the box.
3.
Remove all the unassembled parts from the box.
4.
Remove the machine from the box.
5.
Discard the box and packing material in
compliance with local regulations.
For your personal safety, do not insert battery before
the tool is assembled completely.
4.2
ATTACH THE GUARD
Figure 2 - 3.
4
WARNING
WARNING
WARNING
WARNING
WARNING