Description; Purpose; Overview; Important Safety Instructions - GreenWorks 2101602A Manual Del Operador

Ocultar thumbs Ver también para 2101602A:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2

OVERVIEW

2
3
4
5
Rear handle
1
Auxiliary handle
2
Coupler
3
Trimmer shaft
4
Edge guide
5
Guard
6
Battery release button
7
Lock-out button
8
Trigger
9
2
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING (THIS
POWER TOOL)
Read and understand all instructions before using this
product. Failure to follow all instructions listed below may
result in electric shock, fire, and/or serious personal injury.
Use only identical manufacturer's replacement parts and
accessories. Use of any other parts may create a hazard or
cause product damage.
Always wear safety glasses with side shields marked to
comply with ANSI Z87.1. Everyday glasses have only
impact resistant lenses. They are NOT safety glasses.
1
6
8
WARNING
English
Following this rule will reduce the risk of eye injury. Use
face mask if operating in dusty work spaces.
Avoid Dangerous Environment – Don't expose power
tools to damp or wet conditions. Water entering a power
tool will increase the risk of electric shock.
Don't use in rain.
Keep all bystanders, children, and pets at least 50 ft.
away.
Dress Properly – Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber gloves
and substantial footwear is recommended when working
outdoors. Wear protective hair covering to contain long
7
hair.
Use right Appliance. Do not use appliance for any job
except that for which it is intended.
Avoid Unintentional Starting – Don't carry appliance
with finger on switch. Be sure switch is off when battery
is plugged in.
Don't Force Appliance – It will do the job better and with
less likelihood of a risk of injury at the rate for which it
was designed.
Don't overreach – Keep proper footing and balance at all
times.
Stay alert – Watch what you are doing. Use common
sense. Do not operate this unit when you are tired, ill or
under the influence of alcohol, drugs or medication.
Always store idle power tools indoors – When not in use,
9
power tools should be stored indoors in a dry and high or
locked-up place, out of reach of children.
Maintain Appliance With Care – Replace string head if
cracked, chipped, or damaged in any way. Be sure the
string head is properly installed and securely fastened.
Keep cutting edge sharp and clean for best performance
and to reduce the risk of injury. Follow instructions for
lubricating and changing accessories. Inspect appliance
cord periodically, and if damaged, have it repaired by an
authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry,
clean, and free from oil and grease. Failure to do so can
cause serious injury.
Check damaged parts before using the appliance, a guard
or other part that is damaged should be carefully checked
to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, damaged
mountings, and any other condition that may affect its
operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service
center unless indicated elsewhere in this manual.
Remove or disconnect battery before servicing, cleaning
or removing material from the gardening appliance.
Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care. Use appliances only with
specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire. Use
only Greenworks 29462/2901319/29472 battery or other
BAG series.
4
Tabla de contenido
loading

Tabla de contenido