Transportation Of Rechargeable Lithium-Ion Battery Pack; Environmental Operating Conditions; On/Off Setting, Button B Fig.1 - aquatechnik BST 32 PLUS Instrucciones De Uso

Idiomas disponibles

LITHIUM-ION BATTERY PACK

PICTURES AND INFORMATION FROM THE ORIGINAL METABO MANUAL (17030016_00_1020)

An increase in battery temperature during charging and during use is a normal phenomenon. Over-

heating of the battery can temporarily block the charging operation. A special sensor intervenes by

restarting charging in the correct way (in this case the charging time may be longer). To preserve

the service life and proper functioning of the battery, it is recommended to discharge it completely

- at least the first few times - before recharging. Carrying out partial recharging of the batteries can

lead to a reduction in battery runtimes.

TRANSPORTATION OF RECHARGEABLE LITHIUM-ION BATTERY PACK

The 2.0 Ah lithium-ion rechargeable batteries, supplied with the Pipe Flaring Machine BST 32

PLUS, if unmodified and completely original, do not require any additional packaging in accord-

ance with UN3480 and UN3481, which regulate the transport of batteries with a range of more

than 5.5 Ah. For more details regarding the transport of batteries by ship, road and air, safety

information and disposal of packaging, please refer to the Metabo website page, which contains

all environmental, health and safety information in accordance with European regulations.

https://www.metabo.com/uk/en/info/service-1/environment-health-safety/

The operating environment in which the device is to be placed is a normal construction site or work-

shop environment and, therefore, a room sheltered from weather conditions such as rain, hail, snow,

fog, etc. Naturally, it should be free from corrosive vapours or sources of excessive heat.

- Environmental operating temperature must be between -20°C and 50°C

- Relative humidity must be between 20% and 75%, non-condensing

- Operating heights must be between 0 and 1000 m above sea level

- Performance is limited at temperatures below 0 °C or heights above 1000 m

- Permissible environmental temperature during storage: 0°C to 30°C

- Power on: press push-button switch B.

- Power off: release push-button switch B.

Note: the noise audible when the tool is switched off is due to the type of construction (rapid stop)

and does not affect the operation and service life of the tool in any way.

Tabla de Contenido