IMAGES AND INFORMATION OBTAINED FROM THE ORIGINAL METABO MANUAL (170300020-0321)
9. Repairs
Repairs to the charger must only be carried out by qualified electricians.
If the mains connection cable of this device is damaged, it must be replaced by the manufacturer or
the Customer Service department of the manufacturer or a similarly qualified person to prevent en-
dangering personnel and property. If you have Metabo charges that require repairs, please contact
your Metabo service centre. See www.metabo.com for addresses.
10. Environmental Protection
Observe national regulations on environmentally compatible disposal and on the recycling of dis-
used machines, packaging and accessories.
Only for EU countries: never dispose of power tools in your household waste! According
to European Directive 2012/19/EU on Waste from Electric and Electronic Equipment and
implementation in national law, used power tools must be collected separately and recy-
cled in an environmentally-friendly manner.
11. Technical Specifications
See page 3.
U = voltage ranges of the battery packs
C = battery pack capacity
IC = charging current
t
= charging time
Depending on the residual capacity and the temperature of the battery pack, real charging times
1)
may deviate from the specifications.
Recommended ambient temperature when charging: 0°C to 40°C.
Changes due to technological progress reserved.
Device of protection class II
~ AC Power.
36
BATTERY CHARGER
1)