. Ti er
<Chec ing the Current Auto Off Ti er Setting>
4
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the Timer Menu button 2 for 3 seconds, so that "Monitor"
is indicated on the screen (at 4).
3. To close the monitor and return to the standard control screen, press
the Operation mode (Back) button 2.
<To Turn Off the Auto Off Ti er>
Hold down the Timer On/Off button 9 for 3 seconds, so that "Timer
Off" appears (at 6) and the timer value (at 7) disappears.
°C
6
Alternatively, turn off the air conditioner itself. The timer value (at 7)
will disappear from the screen.
<To Turn On the Auto Off Ti er>
Hold down the Timer On/Off button 9 for 3 seconds. The "Timer
Off" indication disappears (at 6), and the timer setting comes on the
display (at 7).
Alternatively, turn on the air conditioner. The timer value will appear at
7.
°C
6
7. Other Functions
7.1. Loc ing the Re ote Controller Buttons
(Operation function li it controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of
locking function to use. (For information about selecting the lock type,
see section 8, item [4]–2 (1)).
Specifically, you can use either of the following two locking functions.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Loc ing function" indicator appears on the screen to indicate that
uttons are currently loc ed.
12
5
Timer Setting
OFF
1
AUTO OFF
5.
7
°C
AUTO OFF
7
AUTO OFF
7
AFTER
OFF
°C
AUTO OFF
1
Locking function
indicator
FUNCTION
1
4
.2. For
ireless re ote controller
AUTO STOP
AUTO START
1 Press the
or
button (TIMER SET).
OFF timer : A
is blinking.
ON timer : A
is blinking.
min
h
2 Use the
and
buttons to set the desired time.
3 Canceling the timer.
To cancel the OFF timer, press the
To cancel the ON timer, press the
ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
used.
<Ho
to Loc the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds. The "Locking function" indicator appears
on the screen (at 1), indicating that the locking function is now
engaged.
* If locking has been disabled in Function Selection of remote
controller, the screen will display the "Not Available" message when
you press the buttons as described above.
°C
will blink on the display.
°C
<Ho
to Unloc the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds—so that the "Locking function" indicator
disappears from the screen (at 1).
°C
A
13
2
AUTO STOP
button.
AUTO START
button.
1
FUNCTION
°C
1
FUNCTION
°C
1
°C
1)