Parkside Performance PPTSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 41

Switching off:
1. Release the on/off switch (5).
2. Guide the saw blade back into the pro-
tective hood (24).
Connecting the device
with the Lidl Home App
The device can only be connected to
the Lidl Home App if you are using it
with a Smart Performance battery.
1. Slide the device base onto a Smart Per-
formance battery until it clicks into place.
Push the button
Smart­LED­display­
starts to light up.
2.­Enable­Bluetooth
3. Open the Lidl Home App.
From here there are options

to connect the device.
 If­this­is­the­first­device­you­want­to­con-
nect­to­the­app:
­"At home",­select­the­op-
4. On the tab
tion­"Add device".
The­app­scans­the­area­for­available­de-
vices and indicates if available devices
have been found.
If this is not the case, read on if

possible
5.­If­you­select­"Go to add",­the­available­
devices are displayed in a list.
6. Select the device by setting the check mark
. Select only one device at a time. If
there are other check marks for other de-
vices, clear the check marks by pressing
them.
7. Now press the
colour as the set check mark.
8.­Confirm­the­successful­connection­with­
„Finish".­The­device­is­now­listed­on­the­
­"At home"­and­can­be­selected.
tab
22).­The­
(
( 18)
® on your smartphone.
 
,
.
, that has the same

If you have already connected other de-
vices­to­the­app:
4. On the tab
in­the­upper­right.­The­app­scans­the­
area for available devices and indicates
if available devices have been found.
If this is not the case, read on if
possible
5. Proceed as with

If a list of available devices is not auto-
matically­suggested­to­you:
If the device is not suggested automatical-
ly,­follow­these­steps:
4. On the tab
in the upper right.
5.­Select­"Other"­in­the­bar­on­the­left.
6.­Select­„Other-2".
and
7.­Confirm­that­the­display­is­flashing­ra-
pidly.
The­app­now­searches­for­available­devi-
ces and suggests them to you.
8. Select the desired device by pressing
the to add it to the app.
9.­First­confirm­with­„Next",­then­with­„Fi-
nish".
Upgrading­the­firmware­can­change­
the features of the app.
Features of the app
Select the smart battery (that you are using for
the­device).­This­takes­you­to­the­overview­
page for the device with the following
information­and­settings:
If you are not immediately directed to
the overview page of the device, se-
lect­the­Performance­device­PPTSA­20-Li­
A1­under­"Device­information"­on­the­
overview page of the battery.
GB MT
­"At home",­select­the­

.
 ­from­point 5.
­"At home",­select­the­
41