Parkside Performance PPTSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 27

Sierra de inmersión recargable
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 172
Intended purpose
The­cordless­plunge­saw­is­suitable­for­sa-
wing­lengthwise,­crosswise­and­exchange­
cuts in wood, plastic or light building ma-
terials (e.g. plasterboard). Sawing of metal
is not permitted.
Any­other­use­that­is­not­explicitly­ap-
proved in these instructions may result in
damage to the equipment and represent a
serious­danger­to­the­user.The­user­or­op-
erator is responsible for accidents causing
injury­to­other­people­or­damage­to­prop-
erty.This­equipment­is­not­suitable­for­com-
mercial­use.­Commercial­use­will­invalidate­
the guarantee.
The­device­is­part­of­the­(Parkside)­
X 20 V TEAM­series­and­can­be­opera-
ted­using­(Parkside)­X 20 V TEAM­series­
batteries.­The­batteries­may­only­be­char-
ged using chargers from the (Parkside)
X 20 V TEAM­series.
General description
An illustration of the most
important functional compo-
nents can be found on the
fold-out­pages.
Extent of the delivery
Carefully­unpack­the­appliance­and­check­
that­it­is­complete:
-­ Cordless­plunge­saw
-­ Parallel­guide
-­ Universal­saw­blade­Ø­140­mm­
(pre-assembled)
-­ Guide­rail­(2-part)­
+ connecting element
-­ 2x­hex­key
­ (1x­in­storage­case,­
1x­in­auxiliary­handle)
-­ Storage­case
-­ Instruction­Manual
Battery and charger are not
included.
Overview
­ 1­ Auxiliary­handle
2 Locking lever
3 Switch lock
­
4­ Shavings­ejector
5 On/Off switch
6 Handle
­
7­ Butterfly­screw
(cutting angle)
­
8­ Eccentric­screw
9 Guide rail
10 Saw table
­
11­ Butterfly­screw­(parallel­guide)
12 Reference mark (cutting angle)
­
13­ Cutting­angle­scale
­
14­ Adjusting­knob
15 Locking mechanism
(cutting depth scale)
­
16­ Large­hex­key
­
17­ Small­hex­key
­
18­ Smart­LED­display
­
19­ ECO­LED­display
­
20­ Charge­level­indicator
21 Overload warning indicator
22 Button (speed)
­
23­ Case
24 Guard cover
25 Recess
­
26­ Cutting­width­marking
27 Saw blade
28 Reference marking
(cutting depth scale)
­
29­ Cutting­depth­scale
30 Parallel guide
31 Guide rails
­
32­ Connecting­element
33 Grub screws
GB MT
27
loading