Parkside PADM 1250 A1 Traduccion Del Manual De Instrucciones Originale página 29

• Secure a long workpiece from
tipping by using a roller table or
similar.
• Do not operate the machine
without protective equipment.
• Damaged or contaminated work-
pieces can present a risk. The
penetration of metal parts and
spattering pieces into the work-
piece can be very dangerous.
• If possible, only connect the device to
a power socket with a residual current
device (RCD) with a rated residual cur-
rent no more than 30 mA.
Safety equipment
• Safety switch in the recess (13)
ensures that the collection container
with connection for external dust
extraction is fitted, otherwise the device
cannot be started
• Anti-kickback claws (
reduce the risk of kickback
• Planer blade cover (
prevents you from being able to reach
into the (running) blade shaft
Residual risks
There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
a) Cutting injuries
b) Hearing damage if suitable ear protec-
tion is not worn.
c) Lung damage if a suitable protective
mask is not worn.
Warning! During operation, this
power tool produces an electromag-
netic field. Under certain circum-
Fixed installation
Secure the machine to the workbench,
placing suitable screw clamps on the lugs
provided (7).
Commissioning the
surface planer
24)
C
25)
D
To use the machine as a surface planer, the
following assembly work must be carried out.
1. Using the Allen key (15), unscrew the
2. Re-tighten the hexagon socket screws
Dismantling is carried out in reverse order.
stances, this field may negatively
affect active or passive medical
implants. In order to reduce the
danger of serious or fatal injuries,
we recommend that individuals
who wear medical implants should
consult their doctor and the manu-
facturer of the implant before oper-
ating the machine.
Caution! The machine may
tip if it is not secured. Risk of
injury!
Remove the cross struts at-
tached to the table to secure
it for transport before using
the device for the first time!
Mounting the rip fence
two hexagon socket screws (19) from
the device housing (11) as far as need-
ed to be able to attach the rip fence (1).
The recesses in the rip fence (1) must
be placed on the two hexagon socket
screws (19).
(19) to fasten the rip fence (1).
GB MT
29