Tabla de contenido
1
a
b
c
d
e
f
5-11
66
2
1
2
5.5.1
Gauge head application on
various Wheel types
In order to be able to determine unbalance in a
single measuring run, the rim dimensions have to
be entered correctly. Therefore proceed with utmost
care and as is shown in the Figures when applying
the gauge head on the rim in the desired weight fitting
position. Incorrect application will result in deviations
of measured values and consequently inaccurate
results of the measuring run.
Fig. 5-11, a to f
show correct application (with and without adhesive
weight) of the gauge head on various rims and for
various weight fitting positions.
Fig. a
Standard wheel – Steel rim
1 Gauge head
2 Rim
Fig. b
Standard wheel – Alloy rim
Fig. c
Light-truck wheel – Steel rim
Fig. d
Light-truck wheel – 15° taper steel rim
Fig. e
Alloy wheel - Rim without a housing
for clip-on weights
Fig. f
Alloy wheel – Adhesive weights
1 Left correction plane, first application position.
2 Right correction plane, second application
position.
Tabla de contenido
