Idiomas disponibles
Idiomas disponibles
10.4 Compressor oil change.
1
Keep the engine running for 5 or 10 minutes, so that the oil can reach some
temperature and decrease its viscosity (more liquid). In this way, it will be easier to
extract it completely.
2
Under the oil drain hole, place a suitable container to collect the used oil.
3
Unscrew the oil drain screw by turning it counterclockwise, according to the figure
below. Save the screw and its gasket.
4
Remove the oil cap, so that the compressor receives air and so expels the oil
faster.
5
Once all the engine oil has been extracted, put back the drain screw with its
gasket. In case of spillages, clean.
6
Refill the engine with oil according to point 6.2 (compressor oil filling) of this
manual.
IMPORTANT: To safeguard the environmental regulations, the used oil must be placed in
a sealed container and delivered to a service station for recycling. Do not put it in the trash
or spill it on the ground.
61
