6
Smoothly, grab and pull the starter rope (recoil starter) until you find resistance to
calculate the maximum stroke of the rope (this to avoid damage when pulling
energetically). So let the rope recoils.
Smoothly, pull the starter rope again until you find resistance and then let the rope
recoils. Then pull the rope energetically to start the engine. If you fail on the first
attempt, repeat the operation.
NOTE: If the rope recoils abruptly, the spring or the rope itself may be damaged. This
is not covered by the warranty.
NOTE: The recoiling of the rope must be controlled by the user, holding the handle
tightly. The recoil handle with tension, if wilfully released, may damage the compressor.
NOTE: Never pull the starter rope while the compressor is running.
7
As soon as the engine has started, slowly move the choke to the right (RUN):
53