Connecting The Dirt Outlet; Connecting The Coarse Dirt Outlet; Connecting And Installing The Control System - Oase BioTec Premium 80000 Instrucciones De Uso

4.2.4

Connecting the dirt outlet

The water in the container can be drained via the DN 75 dirt outlet with slide valve at the bottom of the
container if required (for cleaning, repair, overwintering).
Connect a suitable DN 75 pipe and drain the dirty water into the sewer system.
►
How to proceed:
F
1. Remove the cap nuts and push the dirt outlet onto the connection.
2. Tighten the hose clip.
3. Tighten the cap nuts.
Connect the DN 75 pipe to the DN 110 pipe and drain the dirty water via a DN 110 pipe into the sewer
system. This will ensure that the dirty water pipe will be conveniently flushed out with sufficient pressure.
4.2.5

Connecting the coarse dirt outlet

G
The coarse dirt that collects in the dirt channel drains away via the DN 110 coarse dirt outlet (top outlet
on the container) on the input side.
► Connect a suitable DN 110 pipe and drain the dirty water into the sewer system.
4.3

Connecting and installing the control system

The cable harness of the Drum Filter Module contains the connection cables of the signal box, the drum
motor and the rinsing pump.
Connecting
H
Connect the three connectors of the cable harness to the control system sockets. Hand-tighten the
►
union nuts.
The connections are designed to prevent misconnection.
−
First flood the container with water, then connect the control system to the mains voltage/power
−
supply.
Installation
I
Protect the control system from direct sunlight.
►
The control system is splash-proof and may be exposed to rain.
►
► Suspended installation of the control system: Either on the mount on the container wall of the drum
filter module or using the threaded hooks in another position.
- EN -
39