Idiomas disponibles
Idiomas disponibles
•
Do not kink or wrap the power cord and plug around the
appliance, as this may cause the insulation to weaken or
split, particularly where it enters the appliance.
•
Ensure the mains cable is fully extended before use and
arrange it so that it is not in contact with any part of the
appliance.
•
The appliance should not be used in a room, in which the
floor area is less than 5m².
•
Do not operate the appliance with any safety guards
removed.
•
Do not operate the appliance if there are signs of
damage to the appliance, power cord, or any of the
accessories supplied. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent
or a similarly qualified person in order to avoid a hazard.
•
Do not attempt to repair or adjust any electrical or
mechanical elements in the heater. Doing so may be
unsafe and will void your warranty.
•
This heater is filled with a precise quantity of special oil.
Repairs requiring the opening of the oil container are only
to be made by the manufacturer or the manufacturer's
service agent who should be contacted if there is an oil
leak.
•
Regulations concerning the disposal of oil when
scrapping the appliance must be followed.
•
The appliance can be used by children older than 3 years
and younger than 8 years under constant supervision
and with the control always set to minimum temperature
value. Children older than 3 years and younger than
8 years should not plug in, regulate and clean the
appliance or perform user maintenance.
SPECIFICATIONS
- -
Model:
PB-H-23W
Frequency:
50Hz
Product Dimensions:
470 x 280 x 602mm
6 of 80 | English
Voltage:
220-240V~
Power:
2500W
Net Weight:
8.3kg
SYMBOLS EXPLAINED
- -
For indoor use only.
Equipment complies with the applicable EU safety requirements and regulations.
PARTS
― ―
1.
Handle
2.
Power indicator
1
3.
Adjustable thermostat
4.
Power switch
3
5.
Timer
6.
Cable storage
4
7.
Wheels
These images are for reference only,
5
please refer to your product.
If you find you're missing any parts from your
order, please contact our customer care
team by emailing [email protected] for
fast and friendly help.
ASSEMBLY INSTRUCTIONS
― ―
CAUTION: ONLY OPERATE THE RADIATOR IN ITS NORMAL UPRIGHT POSITION WITH THE CASTOR
WHEELS FITTED TO THE BOTTOM OF THE UNIT
1.
Unpack the castor wheels and arc-shaped brackets from the heater packaging.
2.
Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to
the paint finish or your floor surfacing.
3.
Fit the two (2) castor wheels onto the radiator by placing the arc-shaped brackets between
the outermost radiator fins on each side of the radiator.
4.
Securely fasten the two (2) castor wheels onto the radiator by screwing two (2) wing nuts
onto each foot.
5.
Turn the radiator back upright once the castor wheels have been fitted.
Please read instruction manual
and retain for future use.
2
6
English | 7 of 80
7
