Idiomas disponibles
Idiomas disponibles
VARIOUS FUNCTIONS
Delay end
After selecting the desired washing program,
press the DELAY END button repeatedly
before pressing the START/PAUSE button.
You can set the program end time (delay end
time) in increments of 1 hour. The maximum
appointment end time can be set to 24 hours
The delay end time is displayed on the digital
tube, the delay end indicator on the display
screen lights up, and then press the
START/PAUSE button to start the delay end
function, and the delay end time on the digital
tub starts to count down.
Note: The program running time is included in
the set delay end time.
Example: Take a washing cycle of 1 hour and
30 minutes and an example of an 8-hour delay
end. The display screen displays:
delay end indicator "
display screen displays:
indicator " " goes out after the countdown of
about 6 hours and 30 minutes, and the
reservation washing program starts to run, and
the display time of the digital tube switches to
the program running
The total time from the time of appointment to
the end of program operation is about 8 hours.
How to cancel the reservation function:
Turn the wash cycle selector knob and select
a new wash cycle to cancel the delay end
function. The delay end time displayed on the
digital tub goes out, and the delay end
indicator goes out at the same time.
Note:
The end time of the operation may vary from
the actual end time of the reservation
according to the water pressure, drain,
clothing type, water temperature and other
conditions.
STEAM WASHING
Press the STEAM button to add a steam
washing process after the last drain stage of
the selected (or running) wash cycle and
before the last spinning. In the process of
steam washing, the machine.
generates a large amount of high-temperature
steam to deeply surround and penetrate the
, the
" flashes, and the
, the delay end
and counts down.
fabric of clothes, improve the softness and
elasticity of clothes, and at the same time
remove the odour and freshen the clothes.
After the steam washing process, the machine
enters the final drain and spinning stage.
STAINS REMOVAL
This option allows for selecting the type of dirt
so as to optimally adjust the cycle for removing
the stains, there are eight types of stains to
choose from:
Oils , Food based
The appliance adjusts the average washing
temperature, drum movement and soaking
time to the specific type of stain. Hot or cold
water, gentle or intensive washing and long or
short soaking ensure that the wash cycle
sequences specially adapted to each type of
stain. Selecting this option make sure that
stains are treated in the best possible way.
NOTICE: Pressing and holding the STAINS
button automatically runs through the set type
of stains.
The wash cycle duration varies according to
the type of selected dirt type.
CANCELLING THE BUZZER
Press and hold the SPEED button and ONE
TOUCH button together at the same time for
at least 3 seconds, you can turn off the buzzer
that sounds during the washing cycle running.
• To activate the buzzer setting
Do the same operation as you did for
cancelling. The buzzer setting is activated
after one beep.
108
Milk
Red wine
Juice
Pigment
Mud
Grass
Blood
