Idiomas disponibles
Idiomas disponibles
PREPARING AND SHORTING THE LAUNFRY
M---Display
The display is useful when programming the machine and provides a great deal of information.
1---Temperature indicator
When a wash cycle is selected, the
default temperature value of this program will
appear on the digital display, with the
temperature indicator light is lit.
You can change the temperature value by
pressing the TEMP.
shown on the digital display, it indicated the
appliance using only cold water without utilized
the heater in this program.
2---SPINNING SPEED indicator
When a wash cycle is selected, the
default spinning speed value of this program
will appear on the digital display, with the
spinning speed indicator light is lit.
You can change the spinning speed value by
pressing the SPEED
shown on the digital display, it indicate the
washer does not spin after the final drain
process in this program.
3---DOOR LOCK indicator
The lit indicator light indicates that the
door is locked. To prevent any
damage, wait until the indicator light
turns off before opening the door.
To open the door while a cycle is in progress,
press the START/PAUSE
DOOR LOCK symbol is switched off the door
may be opened.
button. If "－－" be
button. If "－－" be
button, if the
4---CHILD LOCK indicator
The lit indicator light indicates the
CHILD LOCK function is activated, the
control panel is locked.
5---DELAY END indicator
The lit indicator light indicates the
DELAY END function is activated. The
countdown to the end of the selected wash
cycle will appear on the digital display.
6---ONE TOUCH indicator
The lit indicator light indicates the
M-Smart wash program is selected. There are
three ways to set the M-Smart wash program.
7---RINSE COUNT indicator
When the indicator light lit, you can select the
rinse count, the selected rinse count will
appear on the digital display.
8---STAINS TYPE indicator
The STAIN TYPE symbol lit indicates the type
of dirt has been selected, the appliance will
optimally adjust the cycle for removing the
stains.
102
