Idiomas disponibles
Idiomas disponibles
Player does not respond
to all operating com-
mands during playback
Cannot detect USB
plug-in
Cannot switch to AV-in
or no signal
Switch between
DVD/USB/AV-in
All manuals and user guides at all-guidesbox.com
• Operations are not permitted by the
• Refer to the instructions in the disc
• Unplug the USB connection and plug-in
• The DVD player only support Mass
• The DVD player does not support
• Unplug the AV-in connection and plug-
• Check the connection from the AV
• Use the provided AV cable for connec-
• DVD mode is default source during
• Plug in USB will activate USB mode.
• Plug in AV-in will activate AV-in mode.
• Do not plug-in USB & AV-in at the
• Unplug the connection before you
disc.
inlay.
again. Detection may take some time
that vary with the capacity of your USB
device.
Storage (MSC) format from USB flash
drive.
Hard Disk storage or Media Transfer
Protocol (MTP) format.
in again.
output device, such as digital camera,
video recorder, etc.
tion.
the DVD player power on.
Deactivate it by unplug the connection.
And deactivate it by unplugging the
connection.
same time. Plug-in one type connection
at a time only.
plug-in another connection.
