Packaging; Storage; Maintenance / Cleaning; Repair - Kollmorgen AKM1 Manual De Instrucciones

Safety
10.4.2

Packaging

— Cardboard packing with Instapak
— You can return the plastic portion to the supplier (see "Disposal").
10.4.3

Storage

— Climate category 1K4 according to EN61800-2, IEC 60721-3-2
— Storage temperature
— Humidity
— Store only in the manufacturer's original recyclable packaging
— Max. stacking height
— Storage time
10.4.4

Maintenance / Cleaning

— Maintenance and cleaning only by qualified personnel
— The ball bearings should be replaced after 20,000 hours of operation under rated
conditions (by the manufacturer).
— Check the motor for bearing noise every 2500 operating hours, respectively each
year. If any noises are heard, stop the operation of the motor, the bearings must be
replaced (by the manufacturer).
— Opening the motor invalidates the warranty.
— If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or
spray
10.4.5

Repair

Repair of the motor must be done by the manufacturer. Opening the motor invalidates the
warranty. Send the motor to:
10.4.6

Disposal

In accordance to the WEEE-2002/96/EG-Guidelines we take old devices and accessories
back for professional disposal, if the transport costs are taken over by the sender. Send
the devices to:
English - 38
04/2013
Motor type Packing
AKM1 Cardboard
AKM2 Cardboard
AKM3 Cardboard
AKM4 Cardboard
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
KOLLMORGEN Europe GmbH
Pempelfurtstr. 1
D-40880 Ratingen
®
foam cushion.
Max. sta-
Motor type
cking height
10 AKM5
10 AKM6
6 AKM7
6 AKM8
- 25...+55°C, max. variation 20K/hr.
rel. humidity 5% - 95%, no condensation
see table in chapter "Packaging"
unlimited
Kollmorgen
Max. sta-
Packing
cking height
Cardboard 5
Cardboard 1
Cardboard 1
Pallet 1
Servomotors AKM