General Power Tool Safety Warnings - Makita DFL083F Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening torque
Square drive
*1
No load speed (RPM)
Rated voltage
Overall length
(Depending on the battery)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
*1
• No load speed is adjustable with exclusive application.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interfer-
ence in which case the user will be required to correct
the interference at his own expense.
Hard joint
Soft joint
DFL083F DFL125F
2 - 8 N•m 5 - 12 N•m
(18 - 71 (44 - 106
in•lbs)
in•lbs)
2 - 8 N•m 5 - 12 N•m
(18 - 71 (44 - 106
in•lbs) in•lbs)
9.5 mm (3/8") or
6.35 mm (1/4")
150 - 700 /min 100 - 700 /min 100 - 440 /min 70 - 230 /min 50 - 220 /min
464 - 481 mm (18-1/4" - 19")
1.7 - 2.1 kg (3.7 - 4.7 lbs)
BL1415NA / BL1430B / BL1460A
DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
2 ENGLISH
DFL204F DFL302F
8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
(71 - 177 (142 - 266
in•lbs)
in•lbs)
8 - 20 N•m 16 - 30 N•m 25 - 40 N•m
(71 - 177 (142 - 266
in•lbs) in•lbs)
9.5 mm (3/8")
D.C. 14.4 V
503 - 520 mm
(19-3/4" - 20-1/2")
2.0 - 2.3 kg (4.3 - 5.1 lbs)
DFL403F
(221 - 354
in•lbs)
(221 - 354
in•lbs)