Safety Precautions; Installation Precautions; Cleaning The Device - Urmet 1092/400H Manual De Uso

CAUTIONS
Power
 Only use the battery or the power supply unit provided to power the device. Check mains rating
before plugging the power unit in.
Do not pull the cord to unplug the device.


Safety precautions

 Keep the device away from rain and moisture. Avoid introducing any solid object or liquid inside.
Should this accidentally occur, disconnect the battery from the device and have it inspected by
qualified personnel.
 Never open the device. In all cases, contact a qualified personnel or authorised service centre
for repairs.
 Keep the device away from children.
 Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
 Do not use the device if it should fall or the external casing is damaged. Stop use and contact
an authorised retailer.
 It is advisable to disconnect the power wire if the monitor is not used for a certain time.

Installation precautions

 Do not install the device in a place where it could be exposed to humidity or water. Keep away
from direct jets of water to prevent damage. Contact the authorised retailer in this case.
 Do not use the device in presence of smoke, vapour, humidity, dust or intense vibrations.
 Wait for a while before operating a device immediately after transporting it from a cold place to a
warm place and vice versa. Wait on average for three hours: this will allow the device to adapt
to the new ambient (temperature, humidity, etc.).

Cleaning the device

 Rub delicately with a dry cloth to remove dust and dirt.
 Dip the cloth in neutral detergent if dirt cannot be removed with a dry cloth alone.
 Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated clothes to
clean the device to prevent deformation, deterioration or scratches to the paint finish.
Privacy and copyright
Product users shall be responsible for checking and respecting all local rules and regulations

concerning monitoring and recording video signals. The manufacturing SHALL NOT BE LIABLE
for use of this product not in compliance with the laws in force. For more information see
http://www.garanteprivacy.it
10
DS1092-527B