Idiomas disponibles
Idiomas disponibles
10.4.2.2 Turning on the light
To be able to turn on or turn off the lighting of the unit, you only have to press the key
once.
If you want the light to be activated every time the door is opened, the light symbol
should not appear on the display when the door is closed, if it appears press the
key
once to disable it, now the light will only activate when the door is opened.
In the event that we want the light to be always active (whether the door is closed or
open), activate the light by pressing
always remain on.
10.4.2.3 Accessing auxiliary functions
To access auxiliary functions:
1. With the display on, keep the key
2. A menu will appear with the following options, being able to select between
them through the down or up
Manual defrost: it will carry out a defrost if the temperature
conditions allow it with the evaporator probe enabled "PR3=5". If the
evaporator probe is not active, the defrost will be by time.
Air: performs a manual air change (if this option is enabled).
Rest: performs a manual air exchange (if this option is enabled).
Next: Ends the current process or phase and moves to the next
phase. Air replacement, Run-Rest and Defrost that continue their course are
excluded.
Energy Saving: Enables the energy saving function by varying the
"active temperature set + R4". By repeating the operation, the energy saving
mode is disabled.
Aux: if the auxiliary relay is enabled in manual function.
3. Once configured, or if you want to select another function in a
previous menu, you can go back by pressing the key
when the door is closed and the light will
pressed.
keys and access with the key
.
30
