Idiomas disponibles
Idiomas disponibles
chamber, and in the lower left part it indicates the selected program.
16. Now press the button
17. With the program started by pressing the button
the values of temperature, humidity and times of the active cycle at that
moment, being able to modify them with the down or up keys
Remember that each program has 8 cycles (1 stoving, 6 phases and 1 parking).
18. To stop or end the program, simply keep the key
Configuration of programs, parameters, language and other functions:
•
7. With the display in the ON state, keep the key pressed
8. The following options will appear:
Program 01 (to choose another program (program 2, 3, 4...) follow the previous
steps described in Selecting preset programs).
Activated (regulation duration in hours).
Wake up (minutes without regulation).
Air control (*).
Air interval (in hours, active if >0).
Air time (if >0).
Language (display language setting)
Service (access to different functions).
Parameters: configuration of the terminal parameters.
Internal values: it is possible to view the hours of operation of the
compressor, the number of door openings, the reading values of the probes.
Alarms: Shows active alarms.
Delete recorded data: After entering a password (149) the stored data
can be deleted.
Rest. Factory values: Deletes all the parameters that have been modified
that have not been configured by EVCO.
9. To change the temperature, press the
confirm the new setting.
10. Select program to carry out a configuration of the cycles.
11. Within the programs, the 8 configurable cycles will appear, in which we can
modify times, temperature, humidity, air flow, start and stop, of each of the
cycles. Using the keys
entered value.
12. Once configured or if you want to select another function in a previous menu,
you can go back by pressing the key
to start the program.
to go down or up and
.
, you will be able to see
pressed.
.
buttons. Press
to
to confirm the
29
.
