Idiomas disponibles
Idiomas disponibles
Thank you for choosing the BABYMOOV Graphik Baby Rocker.
EN
IMPORTANT - PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE USE – READ THEM
PLEASE COMPLY WITH THESE SAFETY INSTRUCTIONS
• Not suitable for children weighing over 9 kg.
• Never leave the child unsupervised.
• The assembly and adjustment operations must be carried out
by an adult.
WARNINGS - COMPLIES WITH SAFETY REQUIREMENTS
• NEVER LEAVE THE INFANT WITHOUT ADULT SUPERVISION
• Place your baby rocker on the floor ONLY: never use the baby rocker on a soft surface (bed, sofa, cushion), as the seat could tip
over and endanger your baby. It is dangerous to use this baby rocker on any high surface such as a table, etc.
• Always use the baby rocker on a flat, horizontal and uncluttered surface.
• Not suitable for children weighing over 9 kg.
• Do not use the baby rocker once the child can sit up unaided.
• The assembly and adjustment operations must be carried out by an adult. Never adjust when the infant is seated in the baby rocker.
• ALWAYS USE THE SAFETY ATTACHMENT SYSTEM.
• The baby rocker is not a carrycot, nor a car seat.
• This baby rocker is not designed for long periods of sleep. Your baby should be placed in a cot for longer periods.
• Do not use the baby rocker if any part is broken, torn or missing.
• Keep small parts away from children.
• Before using the baby rocker, check that all parts are properly locked into position and adjusted correctly.
• Check the suspension system of the baby rocker regularly.
• Do not use the baby rocker without its protective cover.
• Keep the baby rocker well away from any naked flame, source of intense heat, electric sockets, extension leads, cookers, etc., or
any other object which baby might find within his reach.
• Never carry the baby rocker by the toy bar.
• Never lift or carry the baby rocker with baby in it.
• To avoid any risk of suffocation, never add any pillow, blanket or padding, and keep the packaging plastic bags out of reach of
babies and young children.
• Do not put objects with strings around your baby's neck, do not hang strings from the baby rocker and do not attach strings to
toys. This could lead to strangling.
• Do not put the baby rocker close to a window where the strings of a blind or a curtain could lead to strangling. This could lead
to strangling.
• Do not allow your baby to play with the baby rocker folded up.
• Only use accessories or spare parts that have been approved by the manufacturer.
• This baby rocker is not to be used as a carrycot or a cot. When your child needs to sleep, you should put him/her into a proper
carrycot or cot.
COMPOSITION OF BABY ROCKER
a. Non-slip legs
b. Backrest recline buttons
c. Removable protective cover
d. Removable head support
USE AND SPECIFICATIONS OF BABY ROCKER
A. UNFOLDING THE BABY ROCKER
Unfold the side bars, then insert the horizontal bar into the bar provided for this purpose until you hear a click (Figures 1, 2, 3, 4 and 5).
B. RECLINING THE BACKREST
Lift up the two recline buttons (b) together to recline the backrest (Figure 6). Lower the two recline buttons (b) together to lock the
backrest (Figure 7).
C. RECLINER SEAT OR ROCKER POSITION
Recliner seat position (Figure 8)
Lower the non-slip legs (a) in order to slightly raise the baby rocker.
Rocker position (Figure 9)
Leave the non-slip legs (a) folded to allow for rocking.
8
GRAPHIK BOUNCER • Instructions for use
CAREFULLY
• Do not use the baby rocker if any part is broken, torn or
missing.
• Keep small parts away from children.
WARNING
e. 3-point safety harness
f. Removable toy bar
g. Footrest
h. Carry handles
D. FITTING THE 3-POINT SAFETY HARNESS (e)
Place the baby in the rocker in a seated or lying down position. To access the harness, raise the upper section of the strap between
the legs. Clip the two parts of the harness into the fastener, pull up the strap to adjust the size of the belt then close the upper part
to conceal the fastener. (Figures 10, 11, 12 and 13).
E. ATTACHING THE REMOVABLE HEAD SUPPORT (d)
Only use the head support supplied with your baby rocker. The head support is optional, designed to provide additional support for
your baby's head for maximum comfort. It can be removed from the baby rocker if required.
The head support can be easily attached and removed using the Velcro strip on the back. To attach the head support, thread it onto
the protective cover on the upper part of the seat (c) (Figures 14 and 15).
F. USING THE REMOVABLE TOY BAR (f)
With the baby rocker facing you, fit the toy bar (f) using the holder provided on the right side bar (Figures 16 and 17). Adjust the
angle of the toy bar (f) by rotating it forwards or backwards as required. (Figure 18).
To attach the toy, slide the strap on the toy into the slot provided on the toy bar (f).
H. FOLDING UP THE BABY ROCKER
Make sure that the backrest recline is locked (Figure 19).
To fold up the non-slip legs (a), turn the baby rocker so that the footrest (g) is facing upwards. Unclip the horizontal bar on the metal
frame by pressing the push-button (Figure 20). Remove the horizontal leg from the side leg at the same time, then fold the horizontal
bar onto the side bar (Figure 21). Hold one of the two non-slip legs (a) in one hand and push it downwards (a) (Figures 22 and
23), rotating the leg inwards (Figures 24 and 25). Do the same with the other leg (Figures 26 and 27).
H. CARRYING THE BABY ROCKER
Hold the baby rocker by the two carry handles (h) (Figure 28).
CARE AND WASHING INSTRUCTIONS
• Check the baby rocker often for loose screws, worn parts,
torn fabrics, or stitching that has come undone.
• Change or repair parts if necessary. Only use spare parts
recommended by Babymoov.
• Excessive exposure to the sun or heat may cause fading of
colours or warping of parts.
GRAPHIK BOUNCER • Instructions for use
• Use household soap or a detergent and warm water only to
clean the frame of the baby rocker. Never use bleach.
• The removable protective cover and the removable head
support are surface washable. Use a damp cloth and soap.
• 100% polyester.
9
