Parkside PDMH 4500 B5 Traduccion Del Manual De Instrucciones Originale página 29

AIR HAMMER PDMH 4500 B5
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as de-
scribed and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.
Intended use
The air hammer is suitable for working on plaster,
concrete, tiles, as well as for cutting and slotting
sheet metal.
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage(s) resulting from improper
usage. This appliance is intended for domestic use
only.
Symbols on the compressed air tool
WARNING!
Read the operating instructions
before use.
Wear a dust mask.
Always wear eye protection when
using or maintaining the compressed
air tool.
Always wear ear muffs.
Always wear protective gloves.
Oil regularly
│ GB │ MT
■ 26
Operating components
(See fold-out page for illustrations)
1 Thread
2 Connector nipple (pre-fitted)
3 Trigger
4 Tool holder
Accessories (fig. A)
Flat chisel
5a
Cutting chisel
5b
Pointed chisel
5c
6 Tension spring
Front retaining clip
6a
Rear clip
6b
7 Oil container
Package contents
1 air hammer
3 120 mm round shank chisels
1 connector nipple (pre-fitted)
1 tension spring
1 oil container (only 1x included in the set)
1 set of operating instructions
Technical specifications
Working pressure
Air consumption
Stroke length
Stroke rate
Mounting
Compressed air supply
Weight
(without accessories)
Noise emission value
Noise measurement value determined in accord-
ance with ISO 15744. The rated noise level of the
tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
max. 6.3 bar
400 l/min
41 mm
max. 4500 rpm
10.2 mm (round shank)
1/4"
approx. 1.08 kg
L = 99.3 dB (A)
pA
K = 3 dB
pA
L = 110.3 dB (A)
WA
K = 3 dB
WA
PDMH 4500 B5