Steinberg Systems SBS-TPG-100 Manual De Instrucciones página 14

Comprobador de presión de aire y de profundidad de dibujo en neumáticos
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
c)
Only the manufacturer's service department may repair the unit. Do not carry
out repairs yourself!
d)
Keep these instructions for use for future reference. If the unit is to be passed
on to a third party, the operating instructions must also be handed over
together with the unit.
e)
Keep the packaging and small assembly parts out of the reach of children.
f)
Keep the unit away from children and animals.
g)
When using this unit together with other units, also follow the other
instructions for use.
2.2.
Personal safety
a)
The unit is not intended to be used by persons (including children) with
reduced mental, sensory or intellectual functions or persons who lack
experience and/or knowledge unless they are supervised or have been
instructed by a person responsible for their safety on how to operate the unit.
b)
Pressurized air can cause serious injuries.
c)
Eye, ear, and respiratory protection is recommended.
d)
The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
2.3.
Safe use of the unit
a)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
b)
Keep the unit out of the reach of children.
c)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
d)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
e)
Use air to power the unit, no other gases are allowed.
f)
Do not exceed the recommended supply pressure as this may damage the unit.
g)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
h)
Do not start up an empty unit.
i)
Do not tamper with the unit to alter its performance or design.
j)
Keep the unit away from sources of fire and heat.
k)
Do not exceed the maximum permissible operating pressure of the unit!
loading