Idiomas disponibles
Idiomas disponibles
Before installation, ensure that the local distribution conditions (identification of the type of gas and
pressure) and the adjustment of the appliance are compatible.
GAS FIRE PLACE SAFETY WARNINGS
"The appliance must be installed according to the instructions and National Rules in force
of the country of destination"
• Read the instructions carefully before using this appliance - Never use this appliance indoors,
on vehicles or boat.
• If the instruction of this manual are not exactly followed, dangerous situation may come up; make
sure all parts are in proper place.
• Any modification of the appliance may be dangerous; improper installation, adjustment,
alteration, service or maintenance may cause personal injury or property damage.
• Installation and repair must be performed by a Qualified Service, Agency or Gas Supplier; never
do it by your-self!
• Never use this appliance until all connections have been leakage tested. Never put it into
operation if any leakage is detected; check leakage all the time by soapy foam (never using a
flame). In case of gas leakage, appliance shall not be used; shut-off gas supply and the appliance
must be investigated and rectified by Qualified Service, Agency or Gas Supplier before it is used
again.
• Appliance must be attended all the time while in operation and never attempt to disconnect gas
regulator or gas fittings.
• This is a decorative appliance only and any kind of cooking is strictly forbidden. Never use
charcoal or any other solid fuel but lava rocks supplied with the appliance.
• Do not burn rubbish and any other materials throw on this appliance; do not pour water into the
appliance.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
• Use only gas type (see adjustment in "Specification" section and also Appliance Marking on the
appliance) specified by the manufacturer.
• Use only LPG cylinder specified by the manufacturer (see in "LPG cylinder").
• Shut-off the valve of the LPG cylinder or the gas regulator before moving the appliance.
• Do not move the appliance during use; once it has been turned in "OFF" position (full disk), wait
temperature has cooled down (at least 30 minutes).
• Gloves are strictly recommended to be used while moving this appliance, to protect your hands.
• Always use the appliance on a horizontal not combustible surface to keep it stable.
• Check that the gas regulator seal is correctly fitted and able to fulfil its function.
• Turn off the gas supply at the LPG cylinder after use.
• Flexible metal or rubber pipe, used to connect the appliance with the LPG cylinder must be
changed within the prescribed intervals and according to the National Rules in force (see expiry
date on the flexible metal or rubber pipe).
• Check flexible metal or rubber pipe used at least once per month and while LPG cylinder is
changed; if it shows sign of cracking, splitting or deterioration, it shall be exchanged for a new
33
