Dacor DOC30M977D Serie Manual Del Usuario página 139

Symptom
Optitray
While turning, the
optitray comes out
of place or stops
turning.
The turn table drags
while turning.
The turn table
rattles while turning
and is noisy.
Broiling
Smoke comes out
during operation.
Convection
The oven does not
heat.
Smoke comes out
during preheating.
Cause
There is no roller ring, or the
roller ring is not properly in
place.
The roller ring is not properly
in place, there is too much food,
or the container is too large
and touches the inside of the
microwave.
Food residue is stuck to the
bottom of the oven.
During initial operation, smoke
may come from the heating
elements when you first use the
oven.
Food is on the heating
elements.
Food is too close to the grill.
Food is not properly prepared
and/or arranged.
The door is open.
During initial operation, smoke
may come from the heating
elements when you first use the
oven.
Food is on the heating
elements.
Action
Install the roller ring and then
try again.
Adjust the amount of food. Do
not use containers that are too
large.
Remove any food residue stuck
to the bottom of the oven.
This is not a malfunction. After
you run the oven 2-3 times, it
should stop.
Let the oven cool and then
remove the food from the
heating elements.
Put the food a suitable distance
away while cooking.
Make sure food is properly
prepared and arranged.
Close the door and try again.
This is not a malfunction. After
you run the oven 2-3 times, it
should stop.
Let the oven cool and then
remove the food from the
heating elements.
English 139