Adjusting The Cutting Height; Adjusting The Mowing Duration And Active Times - Stihl RMI 422 PC-LF Manual De Instrucciones

English
NOTICE
The opened flap can be removed upwards from the
machine. This ensures that the unit cannot be lifted and
carried by the flap.

17.4 Adjusting the Cutting Height

WARNING
To reduce the risk of serious personal injury or death,
always press the STOP button before opening the flap and
adjusting the cutting height of the mowing blade.
A
2
1
To lower the cutting height (A):
► Open the flap.
► Press and turn the rotary knob (1) counterclockwise.
The marking (2) indicates the selected cutting height.
► Close the flap.
To raise the cutting height (B):
► Open the flap.
► Press and turn the rotary knob (1) clockwise.
The marking (2) indicates the selected cutting height.
► Close the flap.
8 different cutting heights can be selected:
– Level 1: 0.79 in. (20 mm)
– Level 2: 1.01 in. (25.7 mm)
– Level 3: 1.24 in. (31.4 mm)
62
B
2
1
– Level 4: 1.46 in. (37.1 mm)
– Level 5: 1.69 in. (42.8 mm)
– Level 6: 1.91 in. (48.5 mm)
– Level 7: 2.13 in. (54.2 mm)
– Level 8: 2.4 in. (60 mm)
NOTICE
To avoid damaging the perimeter wire, set the cutting height
to level 4 or higher for the first few weeks. This will allow the
grass to grow through and cover the perimeter wire. Levels
1, 2 and 3 are special heights suitable only for flat lawns with
a ground unevenness less than +/- 0.4 in. (1 cm).
NOTICE
To reduce the risk of damaging the robotic mower, never
attempt to lift, carry or transport the robotic mower by the
rotary knob. The rotary knob is designed to come off the
robotic mower if pulled. This prevents the unit from being
lifted and carried by the rotary knob.
NOTICE
To avoid overloading the motor, avoid setting the cutting
height too low in tall grass. If the motor slows or bogs down
when entering the grass, activate the disabling device and
raise the cutting height.
17.5 Adjusting the Mowing Duration and Active
Times
During active times, the robotic mower leaves the docking
station and mows the lawn autonomously. During these
times, mowing operations, charging operations and rest
periods take place. The robotic mower automatically
distributes the mowing and charging operations between the
available time windows. Under certain circumstances (e.g.
when grass growth is slowed by weather conditions), not all
the active times may be necessary for optimal lawn care.
The active times and the mowing duration can be changed
manually. You can set up to 3 different active times per day,
@ 14.5.
17 During Operation
0478-131-3050-A