Control Panel Display Information; Information Area - Stihl RMI 422 PC-LF Manual De Instrucciones

English
Manual Charging
To start charging:
► Dock the robotic mower.
► If necessary, end standby mode of the robotic mower by
pressing any button.
Charging will start automatically.
During charging, the status screen will show the
charging symbol and the message "Charging
battery".
In all the other menus, the display will show a plug
symbol to indicate that the robotic mower is charging.
Charging time depends on a number of factors, including
battery condition and the ambient temperature. Exposure to
direct sunlight can lead to increased temperatures inside the
machine and battery compartment, which can increase
battery charging times.
Charge status
The status screen will show the current state of
charge.
In all the other menus, the display will show a battery
symbol to indicate the robotic mower's charge status.
If you end standby mode, but the state of charge is too low
for the robotic mower to return to the docking station, this
symbol is displayed over the entire screen. After a few
seconds, the display will turn off and the robotic mower will
return to standby mode.
46

13 Control Panel Display Information

13 Control Panel Display Information

13.1 Information Area

The following information is shown in the top right corner of
the display:
1. Cellular Signal
The display shows the strength of the cellular signal.
– 4 bars: optimum signal strength
– 1 to 3 bars: medium signal strength
– No bars: no signal
A question mark is shown during initialization of the
module while the unit is acquiring the cellular signal.
A small "x" indicates that there is no Internet
connection.
2. Time
The current time is indicated in 24-hour format.
0478-131-3050-A