Idiomas disponibles
Idiomas disponibles
Changing the engraving tip
CAUTION! RISK OF INJURY!
►
Always switch the appliance off before carrying out any work
on it .
♦
Change the engraving tip q as soon as it becomes worn and no
longer delivers the desired engraving results . Turn the engraving
tip lock 0 anticlockwise (in the working direction) until the
engraving tip q can be removed . From below, remove the
engraving tip q from the engraving tip lock 0 .
♦
Remove the spring and the washer .
♦
Slide the washer and spring onto a new engraving tip q .
Then insert them and turn the engraving tip lock 0 clockwise
(in working direction) to lock the tip in place .
♦
Ensure that the engraving tip q is fixed correctly in place .
Working procedures
You can use the appliance to create imaginative and unique engrav-
ings . For example, you can permanently mark valuable items . You
can engrave numbers and letters onto metal, glass, wood, plastic,
ceramics, stone and leather . To do this, use the supplied engraving
templates w .
♦
Hold the appliance at an angle, in the same way you would hold
a pen .
♦
Your arm should be resting on the table .
♦
Move the engraving tip q over the workpiece while applying
gentle pressure . To ascertain the ideal engraving speed, practice
on a spare piece of material .
■
64
│
GB │ MT
PAGG 4 A1
