Manual Setup - Yamaha YSP-600 Manual De Instrucciones

MANUAL SETUP

To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment
parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the
initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.
y
• You can save the settings optimized by the AUTO SETUP procedure (see page 39). A set of settings optimized according to the
specific conditions of your listening environment can be recalled later depending on the varying conditions of your listening
environment (see page 40).
• Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 32). Use
SOUND MENU and BEAM MENU to make additional adjustments.
• BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.
• Make settings for the parameters in BEAM MENU first before making settings for the parameters in SOUND MENU, INPUT MENU,
and DISPLAY MENU.
SOUND MENU
Use to manually adjust the various parameters related to the sound output.
Item
TONE CONTROL
SUBWOOFER SET
MUTE LEVEL
AUDIO DELAY
DD/DTS Dynamic Range
TruBass
BEAM MENU
Use to manually adjust the various parameters related to the sound beam output.
Item
SETTING PARAMETERS
BEAM ADJUSTMENT
IMAGE LOCATION
INPUT MENU
Use to manually adjust the various parameters related to the audio and video input.
Item
INPUT MODE
INPUT TRIM
INPUT RENAME
HDMI SET
DISPLAY MENU
Use to manually adjust the various parameters related to the display.
Item
F.DISPLAY SET
OSD SET
UNIT SET
58
En
MANUAL SETUP
Adjusts the output level of high-frequency or low-frequency sound.
Adjusts the various subwoofer settings.
Adjusts the muting level.
Adjusts the audio delay.
Adjusts the dynamic range of Dolby Digital or DTS signals.
Selects the bass sound enhancer.
Adjusts the listening room and listening position settings.
Adjusts the various sound beam settings.
Adjusts the sound position of the front left and right channels.
Selects the initial input of the source.
Adjusts the input level of the source.
Renames the displayed input source.
Adjust the various HDMI settings.
Adjusts the front panel display settings.
Adjusts the OSD settings.
Changes the display unit of measurement.
Features
Features
Features
Features
Page
64
64
64
65
65
65
Page
60
61
63
Page
66
66
67
67
Page
69
69
69