Yamaha YSP-600 Manual De Instrucciones página 271

YSP-600
QUICK REFERENCE GUIDE
This quick reference guide explains steps to connect a TV and a DVD player/recorder to this unit and achieve
the surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual.
1
Installing this unit
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound efects may not be
achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit in the exact center of the wall when it is Install this unit in the corner at a 40º to 50º angle from the
measured from the left and right corners. adjacent walls.
An object, such as furniture An object, such as furniture
40º to 50º
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
For further information on installation, see page 13 in the Owner's Manual.
The following is an example of installing this unit in a rack.
1 2 3
Place this unit in front of Connect this unit to your Install this unit in the
the rack. TV and DVD player/recorder. rack.
Hint
To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
Note
Be careful not to leave scratches on this unit or the rack.
Printed in Malaysia WN77830 [En]
2
Connecting external components to this unit
Supplied accessories used for connections
and operations in this guide
Audio pin cable (x1)
OSD* video pin cable (x1)
Connecting external components such as a TV or DVD player/recorder to this unit.
Optical cable (x1)
Digital audio pin cable (x1)
Connect your TV or DVD player/recorder to this unit using appropriate cables as shown below.
IntelliBeam microphone (x1)
For further information on connecting other components, see pages 16 to 26 in the Owner's Manual.
Cardboard microphone stand (x1)
Demonstration DVD (x1)
This connection example shows a way to connect external components such as a TV or DVD
Connection
*OSD: On-Screen Display
player/recorder to this unit by using the supplied cable.
example 1 DVD player/recorder and the analog/digital audio from the TV.
DVD player/recorder to make a video connection between your DVD player/recorder and TV.
Connect cables in the following order.
1
Audio pin cable
(Inputs the TV analog audio sounds
2
OSD video pin cable
(Displays the YSP-600 menu screen
Front left channel
Center channel
ANALOG VIDEO
AUDIO OUTPUT INPUT
Front right channel 1
L
Surround left channel R
Surround right channel
1 2
4
Installation is completed.
VCR TV/STB SUBWOOFER VIDEO TV/STB
OPTICAL
AUDIO INPUT OUT DIGITAL INPUT
Note
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
You can enjoy the multi-channel audio from the
Use the video pin cable supplied with your
Supplied
3
Optical cable
to this unit)
(Inputs the TV digital audio sounds to this unit)
4
Digital audio pin cable
on the TV)
(Inputs the DVD digital audio sounds to this unit)
TV
DVD player/recorder
Video connection
OPTICAL COAXIAL
DIGITAL OUTPUT DIGITAL OUTPUT
1. Pull out the cap.
2
2. Check the direction.
3 4
YSP-600
OUT DVD IN AUX
HDMI
L
R
VCR TV/STB SUBWOOFER VIDEO TV/STB AUX DVD SYSTEM
OPTICAL COAXIAL CONNECTOR
AUDIO INPUT OUT DIGITAL INPUT
To the AC wall outlet
AUX DVD SYSTEM Subwoofer Do not plug the power supply cable
CONNECTOR
COAXIAL
System connection into an AC wall outlet until all
connections are complete.
Audio connection
If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry
out the AUTO SETUP procedure (see the backside) or select "SWFR" for "BASS OUT" in
"SUBWOOFER SET" via MANUAL SETUP (see page 64 in the Owner's Manual).
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
This connection example shows a way to make the most of the capability of this unit.
Connection
DVD audio and video with higher quality via the HDMI cable.
digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite tuner, cable TV
example 2
tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections using HDMI cables" on
page 18 and "Using the HDMI control feature" on page 57 in the Owner's Manual.
Connect cables in the following order.
1
HDMI cable (sold separately)
(Displays the DVD digital video on the TV)
2
OSD video pin cable (supplied)
(Displays the YSP-600 menu screen on the TV)
TV
HDMI VIDEO OPTICAL
* If TV built-in tuner is
INPUT DIGITAL OUTPUT
INPUT
used, connect the
1
2
optical digital output
jack on your TV to the
TV/STB OPTICAL
Optical cable DIGITAL INPUT jack
on this unit.
Pull out the cap
before connecting
1 2 3
the optical cable,
and then check
(Sold separately)
the direction to
insert the cable.
OUT DVD IN AUX
HDMI
VCR TV/STB SUBWOOFER VIDEO TV/STB AUX DVD SYSTEM
CONNECTOR
OPTICAL COAXIAL
AUDIO INPUT OUT DIGITAL INPUT
System connection
Audio connection
If a subwoofer is connected to this unit, turn on the power of your subwoofer and then carry
out the AUTO SETUP procedure (see the backside) or select "SWFR" for "BASS OUT" in
"SUBWOOFER SET" via MANUAL SETUP (see page 64 in the Owner's Manual).
Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Continued
Note
on the back
Check whether the digital audio output of your TV and DVD
player/recorder is turned on.
You can enjoy
In case your TV does not have a built-in
3
Optical cable (supplied)
(Inputs the TV digital audio sounds to this unit)
4
HDMI cable (sold separately)
(Inputs the DVD digital audio/video signals to this unit)
DVD player/recorder
Optical cable
1. Pull out the cap.
Pull out the cap
before connecting
the optical cable,
HDMI
and then check
OUTPUT
2. Check the direction.
the direction to
insert the cable.
4
(Sold separately)
YSP-600
OUT DVD IN AUX
HDMI
L
R
VCR TV/STB SUBWOOFER VIDEO TV/STB AUX DVD SYSTEM
OPTICAL COAXIAL CONNECTOR
AUDIO INPUT OUT DIGITAL INPUT
To the AC wall outlet
Subwoofer Do not plug the power supply cable
into an AC wall outlet until all
connections are complete.
If you have connected external components,
follow the steps on the backside to start the Continued
AUTO SETUP procedure. on the back
©2008 All rights reserved.