Idiomas disponibles
Idiomas disponibles
Instructions for use for the magic
Thank you for choosing a Dentaurum quality product.
It is essential to read these instructions for use carefully and adhere to them to ensure safe, efficient
use of the magic
Tray Connector and ensure that you and your patients gain full benefit from this
®
product.
As instructions for use cannot cover every eventuality and possible application, contact our hotline if
you have any questions or require advice. Our products are regularly upgraded to incorporate the latest
technical developments. Even though you frequently use the same product, we still recommend that
you always carefully read the current instructions for use supplied with the product.
1. Manufacturer:
Dentaurum J.P. Winkelstroeter KG · Turnstraße 31 · 75228 Ispringen · Germany
2. Guarantee:
Dentaurum guarantees the perfect quality of its products. The recommended applications are based on
our tests of the product. The operator accepts sole responsibility for the use of the product. The
manufacturer does not accept any liability for poor results, as we have no influence on the subsequent
application of the product.
Any compensation claim relates only to the value of the goods supplied.
3. magic
®
Tray Connector – Instructions for use
The magic
®
Tray Connector is an aid for indirect bonding of magic
copings). It consists of two sections.
4. Supplied as
magic
Tray Connector
®
magic
Tray Connector
®
5. General
If you have any questions, please contact the Dentaurum Orthodontic Hotline:
+ 49 72 31 / 803-550.
Date of information: 08/05
Subject to modifications
ENGLISH
The T-shaped end is inserted into the slot of the magic
completely. The tags on the retention section are used for holding ligatures and
providing reliable retention of the magic
The LinguSet bracket positioning unit (REF. 076-100-00) is recommended for
placing magic
lingual brackets on the set-up model. The following technique is
®
recommended to ensure exact transfer of the bracket position established on the
model using single tooth trays.
Insert the T unit into the slot of the bracket. Adapt the retention section towards
the buccal contour of the tooth. Ensure there is a uniform gap between the magic
Tray Connector and the tooth surface (approx. 1 mm).
Coat the plaster model at the incisal edges and occlusal and buccal surfaces of the
relevant teeth with separating agent (REF 162-800-00). Attach the ring of an elastic
ligature (REF 774-230-00) to the retention section of the magic
Place the second ring of the elastic ligature around the bracket hook.
remanium
®
wire, 0.51 x 0.51 mm / 20 x 20 (REF 535-051-00), is used for
transferring the tubes. Insert the slot wire from the distal into the tube, take it up
to the occlusal surface leaving a gap of approx. 1 mm and bend it to provide
retention.
Light-curing acrylic is used to fix the magic
the tooth in the form of a coping that should cover the incisal edge and occlusal
surface as well as part of the buccal surface. Ensure that the retention is
completely covered with acrylic. The acrylic should not come into contact with the
brackets and tubes. We recommend marking the tooth denomination clearly on the
transfer copings to facilitate identification.
Cut the appropriate tooth denomination from the template supplied, place on the
coping and completely cover with a thin layer of acrylic. Adhere to the acrylic
manufacturer's instructions for use.
All the individual trays are transferred to the malocclusion model for the final check of the
fit. After checking the fit, make any adjustments that are required. There should not be
any contact between the transfer copings approximally.
15 connectors
30 connectors
magic
®
tray connector
®
Tray Connector (transfer aid)
®
brackets using single tooth trays (transfer
®
Tray Connector in the resin.
Tray Connector and wire in position on
®
REF 164-002-15
REF 164-002-30
®
lingual bracket and fills it
Tray Connector.
®
in
®
