Temperature Measurements - Sonel CMP-400 Manual De Uso

5.7

Temperature measurements

Do not realise measurements if the battery compartment is
open.
To avoid electric shock, disconnect both test probes from
any source of voltage before making a temperature meas-
urement.
To avoid electric shock, be sure the thermocouple has been
removed before changing to another measurement function.
In order to realise temperature measurement it is necessary to
realise the following actions:

place the rotational selector in the position °C or °F,

insert the temperature probe into the negative COM and the
V/Ω/TEMP terminals, making sure to observe the correct po-
larity,

touch the temperature probe head to the part whose tempera-
ture you wish to measure, keep the probe touching the part
under test until the reading stabilizes (about 30 seconds),

read the temperature in the display, the digital reading will in-
dicate the proper decimal point and value,

having done the measurement disconnect the test leads from
the meter.
44
WARNING:
WARNING:
WARNING:
CMP-400 – USER MANUAL