Resistance Measurements - Sonel CMP-400 Manual De Uso


having done the measurement disconnect the test leads from
the meter.
5.3

Resistance measurements

Measurements must not be realised in live circuits. Capaci-
tors must be discharged.
Do not realise measurements if the battery compartment is
open.
In order to realise a measurement of the resistance it is neces-
sary to realise the following actions:

place the rotational selector in the position Ω

connect the red test lead to sockets V/Ω/TEMP and the black
one to sockets COM,

make sure symbol
the case of shorted terminals of the measurement probes the
display shows „0",

with the RANGE button set the measurement range manually
if necessary,

touch the test probe tips across the circuit or component under
test; it is best to disconnect one side of the device under test
so the rest of the circuit will not interfere with the resistance
reading,

read the result of the measurement on the display,

having done the measurement disconnect the test leads from
the meter.
WARNING:
WARNING:
is displayed with open test leads, and in
CMP-400 – USER MANUAL
,
41