Display; Settings; Taking Measurements - Sonel LXP-2 Manual De Uso

1.2

Display

The main read-out field.
Bar graph - analogue scale for showing rapid changes in light intensity.
Additional reading field
Symbols of sampling period and units.
Symbols for setting date and time.
Units.
Symbol of data logging.
Symbol of memory.
Additional reading field
Units.
Symbol of relative measurement.
Discharged battery symbol.
Symbol of MIN / MAX values (also for PEAK HOLD function).
Symbol of HOLD function.
2

Settings

Use SET button to enter the meter settings. The buttons
eter value, while
in the following order:
unit (lx or fc) → sampling period (every 1 s...60 s) → day → month → year → hour → minute → sec-
ond → sounds (On/Off) → AutoOFF (300 s, 600 s, 900 s, none (---)) → unit ...
Exit settings by pressing SET - selected/changed settings will be saved.
3

Taking measurements


Press the power button in order to switch the meter ON.

The device is in the automatic range selection mode. To enter the manual range selection mode,
press RANGE button for 2 sec. Ranges are switched by short pressing of RANGE button. The
range is displayed at the top of the display. Pressing the button again for 2 seconds will return the
device to the automatic range selection mode.

Remove the cover from the photodetector and point it perpendicularly to the light source.
18
and buttons are used to move to the next parameter. Settings are introduced
LXP-2 ● LXP-10B ● LXP-10A – USER MANUAL
and are used to set the param-