Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.2
AC and DC voltage measurements
Do not realise measurements if the battery compartment is
open.
In order to realise a measurement of AC or DC voltage, it is
necessary to realise the following actions:
Insert the black test lead into the negative COM terminal and
the red test lead into the positive V· ·°C·°F·Hz terminal,
Set the function switch to the V Hz position,
Use the MODE button to select AC or DC Voltage,
Connect the test leads in parallel to the circuit under test,
Read the voltage measurement on the LCD display.
5.3
Resistance measurements
Measurements must not be realised in live circuits. Capaci-
tors must be discharged.
Do not realise measurements if the battery compartment is
open.
In order to realise a measurement of the resistance it is neces-
sary to realise the following actions:
Insert the black test lead into the negative COM terminal and
the red test lead into the V· ·°C·°F·Hz positive terminal,
Set the function switch to the
Touch the test probe tips across the circuit or component un-
der test; it is best to disconnect one side of the device under
34
WARNING:
WARNING:
WARNING:
CMP-1006 – USER MANUAL
position,
)
)
)
Capítulos
Tabla de contenido
