Idiomas disponibles
Idiomas disponibles
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking
zones are on. The minute display shows the min. timer. The dot of the corresponding zone flashes. The
shown as below :
Once the countdown timer expires, the corresponding
zone will switch off. Then it will show the new min.
timer and the dot of corresponding zone will flash.
The shown as right:
Touch the heating zone selection control, the corresponding timer will be shown in the timer indicator.
c) Cancel the timer
Touching the heating zone slider control that you
want to cancel the timer
Touch and hold the timer control " - ", the timer
decreases to "00" and the timer is cancelled.
3.3.10
Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever you
forget to turn off your cooking. The default working times for various power levels are shown in the below
table:
Power level
Default working timer (hour)
Power level
Default working timer (hour)
Set more zone :
(set to 15 minutes)
(set to 45 minutes)
(set to 30 minutes)
1
2
3
8
8
8
10
11
12
4
4
4
EN-19
4
5
6
7
8
6
6
6
13
14
2
2
8
9
6
4
