geberit Preda Manual De Mantenimiento página 30

EN
Menu item
[EN]
[DE]
33
[PreFlush]
[Vorspülng]
35
[PostFlush]
[NachSpül]
36
[AttndFlsh]
[BeglSpül]
37
[HybridMod]
[HybridMod]
Parameter
40
[FlshTime]
[Spülzeit]
41
[DetectT]
[VerweilZ]
43
[IntFlushT]
[IntervSpZ]
44
[IntervalT]
[IntervalZ]
30
Description
Activate preflush
When the user is detected, a
flush is actuated for 3 seconds
if there has been no use in the
last 10 minutes.
Activate postflush.
An additional flush of
2 seconds is actuated
3 seconds after a main flush.
Activate attendance flush.
Flushing takes place as long
as there is a user in the
detection range (maximum
60 seconds).
Note: This function results in a
higher level of water
consumption.
Activate hybrid mode
The flush is not actuated
during use (waterless
operation). A periodic flush is
actuated once the delay time
or interval has elapsed → See
the 'Select flush mode' chapter
for a detailed description.
Flush time
Determines the duration of the
flush after one use.
Detection time
Determines the minimum
detection time within the
detection range to be
recognised as a user.
Flush time for the interval
flush
Is active when menu item 30
[Interval flush] is set to [1] or
[2].
Flush interval for interval
flush
Is active when menu item 30
[Interval flush] is set to [1] or
[2].
Application
• To wet the urinal
ceramic before use to
avoid deposits
• To fill the urinal trap
• To ensure thorough
flushing out of the
urinal ceramic
• As background noise
• To reduce the water
consumption
• To optimise the flushing
out of the urinal
ceramic
• To prevent flushes due
to unintentional entry
into the detection range
–
–
Area Factory setting
On = [ON]
Off = [OFF]
Off = [OFF]
On = [ON]
Off = [OFF]
Off = [OFF]
On = [ON]
Off = [OFF]
Off = [OFF]
Off = [0]
Use = [1] Off = [0]
Interval = [2]
1–15 s [...] 7 s [7]
3–15 s [...] 7 s [7]
1–200 s 5 s
1–168 h [...] 24 h [24]
90071995661314699 © 11-2022
970.650.00.0(01)
3 / 4