Replacing The Light Bulb; Cleaning And Maintenance; Guarantee - Dometic WAECO CoolFreeze CF-80 Instrucciones De Uso

_CF-80_110.book Seite 37 Montag, 20. September 2010 10:40 10
6.10

Replacing the light bulb

Press the switch pin (fig. 8 2, page 5) downwards so that the
transparent part (fig. 8 1, page 5) of the lamp can be removed
at the front.
Replace the light bulb.
Note
I
The LEDs in the light bulb must be aligned with the transparent part
of the lamp.
Press the transparent part of the lamp back into the housing.
7

Cleaning and maintenance

Warning – Danger of electrocution!
e
Always pull out the mains plug before you clean and service the
device.
Caution – Danger of damaging the device!
a
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the device.
Never use brushes, scouring pads or hard or pointed tools to
remove ice or to loosen objects which have frozen in place.
Occasionally clean the inside of the device with a damp cloth.
8

Guarantee

The statutory warranty period applies. If the product is defective,
please contact the manufacturer's branch in your country (see the
back of the instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following
documents when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
Cleaning and maintenance
37