Idiomas disponibles
Idiomas disponibles
TORQUE MULTIPLIER
IMPORTANT NOTICE:
factor (5 or 5.2) as the output value from the multiplier (e.g. in 20, out 100 Nm or in 20 Nm,
out 104 Nm).
CAUTION:
pact wrenches may be used.
IMPORTANT NOTICE:
These tools are meant for professional use; therefore, they must be used by trained person-
nel only. Any other use shall be deemed to be improper. Always use personal protection
devices and comply with safety standards in the workplace.
Multiplication ratio means that the input torque is multiplied by the
Torque multipliers must always be used with torque wrenches; no im-
Set the torque wrench according to the required tightening
value; mount the reaction foot or lever on the multiplier,
fixing it with the screw and the required socket. Place
the multiplier on the hexagon, rotating it by hand until the
reaction foot or lever firmly stands on a wall/nut etc.
Put the male square of the torque wrench into the female
square of the multiplier and tighten as much as
needed.
As the forces accumulated inside must be released, rotate
the multiplier in the opposite direction. This operation must
be carried out with great caution to prevent any damage to
things and/or people.
To tighten, use impact sockets only, according to the MAX
torque values applicable to the individual sockets.
While using any extension bars, it is recommended
that the multiplier should be perfectly aligned while
tightening; extension bars exceeding 250 mm in length
should not be used.
Beta
560/C2
560/C4+
561/1
562/1
562/2
CAUTION: Do not exceed the MAX input value
Max out
Max in
1300 Nm
260 Nm
2700 Nm
540 Nm
1000 Nm
200 Nm
1700 Nm
327 Nm
3400 Nm
564 Nm
:
5:1
1/2"
5:1
3/4"
5:1
1/2"
5,2:1
3/4"
5,2:1
3/4"
EN
3/4"
1"
3/4"
1"
1"
3
