1 .4 SAFETY-CONSCIOUS WORK
The safety instructions mentioned in these operating instructions, the existing
national regulations on accident prevention as well as potential in-company work,
operating and safety instructions of the user must be observed.
1 .5 SAFETY INSTRUCTIONS FOR USER/OPERATOR
• Hot or cold machine parts could becoming a hazard, these parts have to be
protected against the handling of the user.
• Touch protection for moving parts (e.g. coupling) must not be removed from the
machine being in operation.
• Leakage (of the tank seal, for example) of hazardous material conveyed (e.g.
explosive, toxic, hot) must be removed in such a way that no danger is caused to
persons and the environment. Legal regulations have to be observed.
• Hazards caused by electric energy must be excluded (for details here, please refer
to the country-specific regulations and the regulations of the local energy supply
companies).
1 .6 SAFETY INSTRUCTIONS FOR MAINTENANCE, INSPECTION AND INSTALLA-
TION WORK
The user has to make sure that all maintenance, inspection and installation work is
carried out by authorised and qualified specialist personnel only, who have sufficiently
been informed by studying the operating instructions.
Basically, work on the machine may be carried out only when the unit is isolated and
safe to do so. The procedure to shut down the machine described in the operating
instructions must be observed at all times.
Pumps or pump assemblies, which convey media hazardous to health, must be
decontaminated. Immediately after completing the work, all safety and protection
devices have to be fitted again and/or have to be made functional again.
Before restart, the points listed in the chapter on initial commissioning have to be
observed.
1 .7 UNAUTHORISED MODIFICATION AND SPARE PARTS PRODUCTION
Modifications or changes to the machine shall be permissible only after consultation
with the manufacturer. Original spare parts and accessories authorised by the
manufacturer serve to ensure safety. The use of other parts may results in the loss of
liability for the consequences that may occur.
1 .8 IMPERMISSIBLE OPERATING MODES
The operational safety of the machine supplied is ensured only when used as
intended according to 3. Description of the operating instructions. The threshold
values indicated in the data sheet must by no means be exceeded.
2 . TRANSPORT AND INTERMEDIATE WAREHOUSING
2 . 1 TRANSPORT
WARNING
Drop of the lifting station .
Risk of injury if the pump is dropped!
Use suitable means of transport.
The packaged pumping stations from the series Sanifos® must not be thrown or dropped. Moreover, they shall be kept
upright during transportation.
2 .2 INTERMEDIATE WAREHOUSING / CONSERVATION
For intermediate warehousing and conservation, it is sufficient to store the system at a cool, dark, dry and frost-proof
place. The system should be kept in an upright position.
3 . DESCRIPTION
3 . 1 FIELD OF APPLICATION
The pumping stations of the series Sanifos® serve to dispose of (collecting and conveying) domestic and industrial grey
water and black water, which occur below the sewer backwater level. They are intended to be installed externally.
13
EN