Idiomas disponibles
Idiomas disponibles
Product description
1.1
Symbols on the title page
Symbol
Meaning
It is essential to read through these
operating instructions carefully be-
fore start-up. This is essential for
safe working and trouble-free han-
dling.
Operating instructions
Never operate the petrol powered
device in the vicinity of open flames
or heat sources.
1.2
Legends and signal words
DANGER! Denotes an imminently danger-
ous situation which will result in fatal or serious
injury if not avoided.
WARNING! Denotes a potentially danger-
ous situation which can result in fatal or serious
injury if not avoided.
CAUTION! Denotes a potentially dangerous
situation which can result in minor or moderate
injury if not avoided.
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of un-
derstanding and handling.
2 PRODUCT DESCRIPTION
2.1
Intended use
The brushcutter is intended for cutting soft grass
and similar vegetation. The brushcutter must be
guided parallel to the ground.
The brushcutter is available in two versions; ob-
serve the instruction steps appropriate to your
brushcutter:
■
126 B, 130 B, 140 B, 151 B: Brushcutter with
"Bike" handle
■
126 L, 130 L, 140 L: Brushcutter with "Loop"
handle
Only work with the trailer when it is fully assem-
bled.
This trailer is intended solely for use in non-com-
mercial applications. Any other use (as well as
442959_a
unauthorised conversions or add-ons) are re-
garded as contrary to the intended use and will
result in exclusion of the warranty as well as loss
of conformity (CE mark); the manufacturer will
thus decline any responsibility for damage and/or
injury suffered by the user or third parties.
2.2
Possible foreseeable misuse
■
Do not cut any shrubs, hedges, trees or flow-
ers.
■
Do not lift the attachment off the ground
during operation.
■
Do not use the brushcutter with anything oth-
er than the OEM cutting tools (see chapter
2.8 "Approved cutting tools", page 29).
2.3
Residual dangers
Even during correct use of the appliance, there is
always a certain residual risk that cannot be ex-
cluded. Depending on the use, the following po-
tential risks can be derived from the type and
construction of the appliance:
■
Throwing out of cuttings, soil and small
stones
■
Throwing out of cut-off parts of the cutting
line
■
Inhalation of cuttings particles if no breathing
protection is worn.
■
Damage to the hearing if no hearing protec-
tion is worn.
■
Cutting injuries when reaching into the rotat-
ing cutting line or the rotating blade
2.4
Safety and protective devices
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
Emergency stop
In an emergency, switch off the engine with the
on/off switch.
Guard plate
The guard plate protects the operator from con-
tact with the rotating cutting line and objects that
are thrown out.
Loop handle with spacer
The "loop" handle ensures that the operator's
feet do not get into the vicinity of the rotating cut-
ting line.
27
