Idiomas disponibles
Idiomas disponibles
1. Fully unwind the mains cable.
2. Fit on a nozzle. Please ensure that the selected nozzle has locked fi rmly in
place.
Round brush:
Volume styler:
Regular brush:
3. Allow the nozzle to cool down before removing it by pulling it off towards the
front.
4. Electrical connection
Make sure that the iron voltage (see name plate) and the mains voltage match.
The voltage can be changed from 115 V to 230 V by means of the switch on
the side of the device; use a screwdriver or similar implement if necessary.
5. Insert the plug in a duly installed 230V/50Hz socket.
6. Set the desired heating level using the multiple-contact switch:
Position C:
Position 2:
Position 1:
Position 0:
7. Dry your hair with a towel and then curl it evenly, e.g. on the round brush, or
shape your hair with the device switched on to create the hairstyle you desire.
8. In order to release the hair more easily from the round brush and volume
attachment, press the button above the step switch and carefully unroll the
strands of hair.
9. After use, turn the device to „0" and remove the mains plug. Leave it cool for a
few minutes before putting it away.
•
Switch off the appliance before cleaning/maintenance and pull out the plug!
•
Clean the air intake opening every now and then with a fi ne brush.
•
Clean the casing with a soft, dry cloth – without any additional cleaning agents.
•
The round brush can be cleaned with a suitable object (comb or brush).
•
Whenever you have cleaned the nozzles or the device itself they should be
thoroughly dried.
•
The device must never be immersed in water!
05-HAS 3019 31
Initial and General Use
This is used to dry your hair when it is curled up.
With this attachment you can give your hair extra
volume during drying.
For subsequent shaping of the hair.
„Cool", cold air
high temperature for rapid drying
medium temperature for gentle drying and shaping
Off
Cleaning and care
GB
31
24.02.2006, 12:01:53 Uhr
